AC517/AC417 - Connection processes for Parent Unit, Camera Unit and Sensor Pad - whichever is replaced:
Connecting replacement Parent Unit:
Firstly, remove the battery from the the original Parent Unit:
Switch ON the Camera Unit & replacement Parent Unit and press the settings icon on the Parent Unit screen
Press the + for camera 1, this will now turn blue
Whilst the + icon is still blue press the Pairing Button on the top of the Camera Unit for 2-4 seconds and release
The + icon in camera 1 will now show as a red Bin Icon
When you see the red trash can icon show on screen pairing is complete
You will also need to connect your Sensor Pad to your replacement Parent Unit:
Switch ON the Camera & Parent Unit and press the settings icon on the Parent Unit screen
Press the pairing icon (bottom left icon) to enter pairing menu
If there is a red bin in the top row press this and a red TICK icon will show:
Press the red TICK icon to delete the red bin
Press and hold the blue cross until it turns to a blue circle
Once connected the red bin will appear again to indicate the Sensor Pad is connected
If there is no red bin icon in the top row press and hold the blue cross until it turns to a blue circle:
Once connected the red bin will appear again to indicate the Sensor Pad is connected
Connecting replacement Sensor Pad
Power OFF the Parent & Camera Unit
Remove the battery from the original Sensor Pad
Place new battery received into replacement Sensor Pad
Power ON the Camera & Parent Unit and press the settings icon on the Parent Unit screen
Press the pairing icon (bottom left icon) to enter pairing menu
If there is a red bin in the top row press this and a red TICK icon will show:
Press the red TICK icon to delete the red bin
Press and hold the blue cross until it turns to a blue circle
Once connected the red bin will appear again to indicate the Sensor Pad is connected
If there is no red bin icon in the top row press and hold the blue cross until it turns to a blue circle:
Once connected the red bin will appear again to indicate the Sensor Pad is connected
Connecting replacement Camera Unit:
Firstly, you will need to delete the original Camera Unit from the monitor:
Switch on the original Camera & Parent Unit
Tap the Settings Icon to open the Pairing Screen
Press the red BIN for camera 1 and a red tick will show next to the red BIN
Press the tick and the red BIN will be replaced with a blue +
Power OFF the original Camera & Parent Units
Switch on the Parent Unit
Tap the Settings Icon in the Parent Unit screen to open the Pairing screen
Press the + for camera 1, this will now turn blue
Switch on the replacement Camera Unit
Whilst the + icon is still blue press the Pairing Button on the top of the Camera Unit for 2-4 seconds and release
The + icon in camera 1 will now show as a red Bin Icon
When you see the red trash can icon show on screen pairing is complete
Here are 3 videos that can also help you:
Comments
0 comments
Please sign in to leave a comment.