AC517: How to: replace the Wireless Sensor Pad

Before beginning the connection process remove the battery from the original Sensor Pad

1. Power ON the Parent & Camera Unit
2. Deactivate movement in the Sensor Pad in the Sensor Pad setting
   • When the toggle is grey = deactivated
   • When the toggle us blue = activated
3. Press the back arrow to return to main setting screen
4. Press the bottom Pairing Icon
5. If there is a red bin in the top Sensor Pad row, press this icon
   A tick will show next to the red bin
6. Press this tick and the red bin will change to a blue+

If there is no red bin or once you have deleted this, place replacement battery into replacement Sensor Pad

1. Press and release the blue + in the top row that shows the Sensor Pad icon
2. The Outer circle containing the + will also turn blue
   Your Parent Unit is now in pairing mode.
   NOTE: this part of the connection process can take approx. 6 – 12 seconds to complete
3. Once completed a red bin will show in the top row and the wireless Sensor Pad icon will show in the information bar

If this fails repeat the process

When the replacement Sensor Pad is set up in the crib and you are ready to monitor movement; reactivate the movement function in the Sensor Pad setting on the Parent Unit

• When the toggle is grey = deactivated
• When the toggle us blue = activated 

Here is a video that can also help you:

• https://www.youtube.com/watch?v=BL5qZzNcwyA