Firstly, you will need to Turn OFF the original Camera Unit:
- Switch ON the Parent Unit
- Press the Menu Icon
- Select the Setting function and press the Menu button
- Select the Pairing menu and press the Menu button
- Select the Nursery Unit 1 and press the menu button
- Select the Trash Icon of Nursery Unit 1 and press the menu button
- Select the Nursery Unit 1 and press the menu button
-
The linking icon will appear on the screen
-
Turn ON the Nursery Unit and press and hold its “pause/pairing” button until the power LED starts flashing while pairing
-
If the connection has been made, the Green Successful Pairing Icon will appear on the screen and the menu will show the OK Paired Icon .
-
Otherwise, the Red Failed Pairing Icon will appear on the screen. You will need to try again
______________________________________
You will also need to connect the Sensor Pad to your replacement Camera Unit:
-
Remove the battery of the Sensor Pad
-
Press the Menu Icon
-
Select the Setting function and press the menu button
- Select the Pairing menu and press the menu button
Select the Sensor Pad 1 and press the menu button
The linking icon will appear on the screen until Successful Pairing Icon appears on the screen.
-
Insert the battery into the Sensor Pad. It will automatically activate the Sensor Pad.
-
If the connection has been made, the Green Successful Pairing Icon will appear on the screen and the menu will show the OK Paired Icon
-
Otherwise, the Red Failed Pairing Icon will appear on the screen. You will need to try again
Here is a video that shows you how to connect the Parent Unit with the Sensor Pad:
Comments
0 comments
Article is closed for comments.