AC210: How to: connect a replacement Parent and/or Camera Unit to your existing Monitor

AC210 - How to Connect your Parent Unit and/or Camera Unit - whichever is replaced:

Connecting the Parent Unit:

For replacement Parent Unit only install the battery provided separately - see attached PDF below

Switch the Parent & Camera Units OFF

Switch the Camera Unit ON

Press and hold the Pause button on the Camera until the green Power Indicator Light blinks and then release

Switch ON the Parent Unit

Once the Angelcare logo disappears off screen PRESS & KEEP HOLD of the Zoom Button on the Parent Unit

Whilst still holding down the Zoom Button quickly PRESS & RELEASE the Power Button on the Parent Unit

Please Note: Do not press the power button for too long as this will switch the Parent Unit OFF and you will need to begin again

Now release the Zoom button

When completed you will see the video display on screen

Connecting the Camera Unit:

Switch the Camera Unit & Parent Unit OFF

Switch the Parent Unit ON

Press and hold the Zoom button on the Camera until the display shows the Viewing Menu (row of Camera Units), then release the button

Use the left or right arrow keys to select Camera Unit 1

Switch the Camera Unit ON and press the pairing button on the Camera for approx 3 seconds

The Parent Unit will display 3 arrows during connection process

When completed you will see the video display on screen